Learn IoT MeetUp - June 5 in San Jose

meetup
events

#14

Checking in with @Dan now. I’ll let you know what I hear back.


#15

@jcasman can you also check with the site if we can connect our own WiFi router to their network switch with a long Ethernet cable? I imagine that we’ll only bring our own WiFi router out if there are connection problems again. It’s not clear if another WiFi router will help with the problem of simultaneous access we encountered at the last two meetups, but it’s worth a try.

Compared to the last meetup, we’ll update the binaries on the s3a7 boards. I think we should also try other things to improve the connectivity.

Between the S3A7 board on the WiFi router to the Internet, there are these variables:

  1. WiFi chipset (we know that the Qualcomm chipset on the S3A7 does not work with the recent Intel WiFi chipset)
  2. WiFi channel frequency
  3. physical distance between WiFi router and S3A7

For items 1 and 3, a different router might help.

The S5D9 and SK-S7G2 have Ethernet access, which will help with connectivity problems in the future, but the S3A7 only has WiFi access.


#16

point 2 in your comments

My guess regarding simultaneous WiFi access from multiple board could be WiFi channel frequency.

Most of the demo application provisioning code use channel 1 and once provision done normal wifi access there is no channel defined.

Like below in provision mode (Access point mode)

g_provision_info.channel = 1.

if possible some one can change this like below in client mode

g_provision_info.channel = (uint8_t)(rand() % MAX_NUM_WiFi_CHANNLES); //random channel

define MAX_NUM_WiFi_CHANNLES 9 or 11

Keeping each device random channels may free up some of the issue.

smartchef project code can be modified like above. But every one download from Renesas sites its worthwhile ask them to change.

Thanks


#17

Nice!

I’m going to meet with Jesse today to at least upgrade the boards to the most recent binary. After this, we’ll look into changing the WiFi channel into 3 equal parts between channels: 1, 6, and 11 or a random channel like the one you suggest.

The problem only occurs when many devices access the WiFi router at the same time, so I’ve suspected that it’s the WiFi channel interference. I hadn’t checked to verify that the channel didn’t rotate.


#18

Hi Craig,

Here is the updated tutorial. This is what I’ll plan to go through at the meetup on June 5th. It starts from scratch with a clean build and it uses all 4 LEDs.

Dan


#19

Great way to show how to configure GPIO. Thanks!


#20

There’s a fun learning challenge with $50 Amazon Gift Card prize if someone wants to implement this before the meetup.


#21

Hi,
I’m interested in attending the workshop.


#22

Hi Karthik,

Fantastic, you’re on the list! Looking forward to meeting you. Have you used Renesas boards before? Any background with IoT?

Jesse


#23

Hello Jesse

I like to join this workshop (second track) , hopefully still you have space. I am not sure this event is basic/first timers focused or bit advanced. I am hoping to learn bit more about hardware configuration and understanding bit more about read/understand board manuals so I can configure easily. Let me know your comments

Thanks
Mariya


#24

Mariya,

For you, we’ll always have space. :slight_smile: I think the second track might be of interest to you. It’ll be taught by @Dan, based on the 4 LED Blinky tutorial he wrote, covering some of the work he’s done with the LCD and LED controls. I think you’ve made a lot of progress in similar areas. It’s possible that it’s not as deep as you’d like, but it may be useful to “share notes.” @craig will be there as well.

I’m hoping you’ll be able to come, and we can connect directly.

Jesse


#25

Thank you.

I will come to this event.

yes, largely I was doing with SKS7g2 board and latest SSP versions, we share notes and details.

Thanks again
Mariya


#26

Great! Looking forward to meeting you.


#27

Getting the IoT kits ready for you!


#28

Picking up more kits from the Renesas headquarters.


#29

Make sure you bring a laptop


#30

My Laptop has only 1 free USB port but S3A7 needed 2 USB port (1 power and another to program) Extra USB power port available or need to bring.

Thanks


#31

You’ll only need this if you want to program the board. You may be able to charge the battery in the S3A7 kit and power the board from the battery. to go through the Smart Garage tutorial, you’ll only need one USB port to power the board.


#32

Thank you. I forgot that there is battery power source part of kit.


#33

Awesome Meetup. Great pizza! Great tutorial! 5 stars!